Network Performance Testing Checklist Post-Antenna Installation 

This checklist is designed to validate network performance after the installation of a high-gain antenna. It ensures that the boosted network connection meets required performance metrics for APN internet connectivity. 

Checklist Items 

Signal Strength Validation: 

• – Use a signal testing device or app (e.g., LTE Discovery) to measure signal metrics (RSSI, RSRP, SINR). 

• – Ensure the following thresholds are met: 

Metric	Optimal Range	Description
RSSI	Closer to -70 dBm or better	Indicates strong signal strength; higher values represent better quality.
RSRP	Between -80 dBm and -100 dBm	Reflects the strength of the reference signal received by the device.
SINR	10 dB or higher	Measures signal-to-noise ratio; higher values indicate better signal quality relative to interference.

 

Cable Connection Check: 

• – Verify all coaxial cable connections are secure and properly waterproofed. 

• – Inspect cables for any physical damage or wear. 

Antenna Alignment Confirmation: 

• – Ensure the antenna is aligned toward the nearest cell tower for optimal reception. 

• – Fine-tune alignment using real-time signal metrics displayed on the testing device or app. 

Router Configuration Validation: 

• – Confirm the router is configured with the correct APN details. 

• – Check that the router detects the antenna signal without interruptions. 

 

Internet Speed Testing: 

• – Conduct an internet speed test using online tools or apps. 

• – Ensure download and upload speeds meet or exceed the expected benchmarks for the facility type. 

 

Facility Type	Download Speed	Upload Speed
Health Posts	10 Mbps	2 Mbps
Medium Facilities	50 Mbps	10 Mbps
High-Volume Facilities	100 Mbps	20 Mbps

 

• – Verify that latency remains below 50 ms under optimal conditions. 

Network Stability Testing: 

• – Simulate peak usage scenarios to test stability and throughput. 

• – Confirm that there are no significant fluctuations in signal strength or connection quality. 

Monitoring Setup Verification: 

• – Ensure all network devices are integrated into the monitoring system (e.g., Zabbix). 

• – Verify SNMP and ICMP protocols are enabled for remote performance tracking. 

Documentation and Handover: 

• – Record the installation details, including signal metrics, speed test results, and alignment angles. 

• – Take photos of the installed antenna for reference. 

• – Provide basic troubleshooting training to the on-site support staff.